Skip to main content

Wiring Day 2

After a little work in the shop on some of the Triumph Foundation's "rehab" chairs, I attempted to charge forward on the wiring again and some odds and ends cleaning on the engine.

I climbed up on the wheel again and cleaned up the aluminum valve covers with wire brush and steel wool to get rid of the grease and oxidation built up over the last 12 years. I had to remove the coil packs and brackets to get to everything, but didn't remove the valve covers themselves.

After a good scrubbing the coil packs came out like brand new. I re-assembled the coil packs after I gave them a thorough cleaning as well, and re-installed them.

I think I will call that a day..